Rifle Scope Mounts (H001,H002, H003,H004,H005,H006/H012 Series)

To optimize accuracy, Henry Scope Mounts are available on this page for the following models H001, H002, H003, H004, H005 and H006/H012. If your model is not listed, please skip to the bottom of the page. Instructions on installation of the scope mount is provided in the packaging. All Henry Scope Mounts accept Weaver style detachable 1" top mount rings (rings not included).

 Note to Big Boy Owners (H006/H012 Series in .38/.357, .44m, .45lc, .41m, .327/.32)

Previous production or 1^st gen Brass Big Boy guns were drilled and tapped on the barrel under the rear sight, they were NOT drilled/tapped on the receiver. You will need to use BB-CSM for 1^st gen H006 Brass Big Boy series. In 2011 we began shipping 2nd generation Brass Big Boy rifles which feature receivers that are drilled and tapped for the scope mount. For 2^nd Gen Brass Big Boys you can use either the BB-RSM (weaver-style) or BB-RSMP (picatinny-style) rails. Ring/base combo also available for 2^nd gen, linked below. 2nd generation Brass Big Boys start with the following serial numbers:

H006 = BB0047222

H006M = BB0015530M

H006C = BB0021188C

ALL H012 Series guns are 2^nd Generation. Ring base sets for 2nd gen Big Boys are available here

Note to Golden Boy Owners (H004 Series in .22s/l/r, .22m, .17hmr)

H004 Series guns with a Brooklyn, NY rollmark on the barrel were not drilled and tapped for a scope mount. If your gun is NOT made in Brooklyn, NY you can use the GB-CSM or GB-CSMP mounts for H004 series guns. The drilled and tapped holes are located under the rear sight. If unsure on how to remove the rear sight, you can watch the video here: Rear Sight Removal and Base Installation

The receivers on the H001, H002, and H003 series have a 3/8^th inch dovetail running along the top of the receiver. You can use 3/8^th inch rimfire rings which attach directly to the dovetail, sold in the Pride store here .You can use the picatinny rail HLPA001 listed on this page if you wish to mount a red dot optic. If you are putting the rail or rings on the US Survival rifle, they will have to be removed before disassembling back into the stock.

Picatinny rails and ring/base sets are available as separate listings for the models below in the Henry Pride Store . Go to the Pride Parts page here to find your compatible mount listing:

H009 Series (Lever Action .30-30)

H010 Series (Lever Action .45-70)

H014 Series (Long Ranger .223, .243, .308, and 6.5 creed)

H015 Series (Single Shot Rifles or Single Shot Shotguns with drilled/tapped barrels)

H018 Series (Lever Action .410 Shotguns)

H024 Series (Brass Side-gate .30-30, .38-55, .35, .45-70)

Please note that the following series listed below will also take a Weaver 63B which we do not sell, but is widely available at your local gun shops: H009, H010, H018, H024 Series rifles.